The LTE class provides access to the LTE-M/NB-IoT modem on the GPy and FiPy. LTE-M/NB-IoT are new categories of cellular protocols developed by the 3GPP and optimised for long battery life power and longer range. These are new protocols currently in the process of being deployed by mobile networks across the world.
The GPy and FiPy support both new LTE-M protocols:
Please note: The GPy and FiPy only support the two protocols above and are not compatible with older LTE standards.
The Sequans modem used on Pycom’s cellular enabled modules can only work in one of these modes at a time. In order to switch between the two protocols you need to flash a different firmware to the Sequans modem. Instructions for this can be found here.
FiPy/Gpy Band Support
Fipy/GPy v1.0 ==> supports 6 bands only (3, 4, 12, 13, 20, 28)
Fipy/GPy v1.2 with Sequans modem Firmware (41xxx) ==> Supports Full range of 17 bands (1, 2, 3, 4, 5, 8, 12, 13, 14, 17, 18, 19, 20, 25, 26, 28, 66)
Fipy/GPy v1.2 with Sequans older modem Firmwares (39xxx)==> Supports 8 Bands (3, 4, 5, 8, 12, 13, 20, 28)
Fipy/GPy v1.2 with Sequans old modem Firmwares < (39xxx)==> Supports 6 Bands (3, 4, 12, 13, 20, 28)
The AT commands for the Sequans Monarch modem on the GPy/FiPy are available in a PDF file. AT Commands for Sequans
Create and configure a LTE object. See init for params of configuration.
from network import LTE lte = LTE()
This method is used to set up the LTE subsystem. After a
deinit() this method can take several seconds to return waiting for the LTE modem to start-up.
Optionally you can specify a carrier name. The available options are:
verizon, at&t, standard.
standard is generic for any carrier, and it’s also the option used when no arguments are given.
For Power Saving Mode (PSM), you can use the following four arguments:
psm_period_value: Configure at which period the device will connect to the network. Values from 0 to 31 are allowed.
psm_period_unit: Specify the unit to be used for
psm_active_value: Configure how long the device will be connected. Values from 0 to 31 are allowed.
psm_active_unit: Specify the unit for
The LTE specification defines the units for configuring PSM. See the constants below. Also see the PSM example in the tutorials.
Disables LTE modem completely. This reduces the power consumption to the minimum. Call this before entering deepsleep.
detach : detach from network.
reset : reset LTE modem.
Query the PSM timers. The return value is a 5-tuple with the following structure:
(enabled, period_value, period_unit, active_value, active_unit).
Enable radio functionality and attach to the LTE network authorised by the inserted SIM card. Optionally specify:
band : to scan for networks. If no band (or
None) is specified, all 8 bands will be scanned. The possible values for the band are:
3, 4, 5, 8, 12, 13, 20 and 28.
bands : similar to
band, but specify a set of bands to scan. E.g.
apn : Specify the APN (Access point Name).
cid : connection ID, see
LTE.connect(). when the ID is set here it will be remembered when doint connect so no need to specify again
type : PDP context type either
LTE.IPV4V6. These are options to specify PDP type ‘Packet Data protocol’ either IP [Internet Protocol] or IPV4V6 ver4,6 , that depends actually on what does the Network support.
legacyattach : When kept = True the API
LTE.isattached() will return True when attached to the Network AND Network registration status is home or roaming, when flag is False, API
LTE.isattached() will return True when attached to the Network only.
When carrier is specified in
lte = LTE(carrier=verizon)) No need to specify band, apn or type these parameters are already programmed in to the LTE modem for each carrier.
True if the cellular mode is attached to the network.
Detach the modem from the LTE Cat M1 and disable the radio functionality.
reset: set to True to reset the LTE modem.
Start a data session and obtain and IP address. Optionally specify a CID (Connection ID) for the data session. The arguments are:
cidis a Connection ID. This is carrier specific, for Verizon use
cid=3. For others like Telstra it should be
For instance, to attach and connect to Verizon:
import time from network import LTE lte = LTE(carrier="verizon") lte.attach(band=13) while not lte.isattached(): time.sleep(0.5) print('Attaching...') lte.connect(cid=3) while not lte.isconnected(): time.sleep(0.5) print('Connecting...') # Now use sockets as usual...
True if there is an active LTE data session and IP address has been obtained.
End the data session with the network.
Send an AT command directly to the modem. Returns the raw response from the modem as a string object. IMPORTANT: If a data session is active (i.e. the modem is connected), sending the AT commands requires to pause and then resume the data session. This is all done automatically, but makes the whole request take around 2.5 seconds.
lte.send_at_cmd('AT+CEREG?') # check for network registration manually (sames as lte.isattached())
Optionally the response can be parsed for pretty printing:
def send_at_cmd_pretty(cmd): response = lte.send_at_cmd(cmd).split('\r\n') for line in response: print(line) send_at_cmd_pretty('AT!="showphy"') # get the PHY status send_at_cmd_pretty('AT!="fsm"') # get the System FSM
delay: specify the number of milliseconds the esp32 chip will wait between sending an AT command to the modem. and reading the response.
Returns a string object with the IMEI number of the LTE modem.
Returns a string object with the ICCID number of the SIM card.
Perform a hardware reset on the cellular modem. This function can take up to 5 seconds to return as it waits for the modem to shutdown and reboot.
Suspend PPP session with LTE modem. this function can be used when needing to send AT commands which is not supported in PPP mode.
Resumes PPP session with LTE modem.
Reset modem configuration to Factory settings.
Puts the modem in to modem upgrade mode and bridging LTE modem UART port to FiPy/GPy UART0 to enable upgrading Firmware over USB port.
NOTE : In this mode all All tasks on the board are halted and a reset is required to regain functionality.
Reconnect esp32 UART 2 to LTE modem UART port.
Check Network Coverage for UE device (i.e LTE modem).
True: There is Network Coverage.
False: No Netwok Coverage.
LTE.IP : Internet Protocol IP
LTE.IPV4V6 : Internet protocol ver. 4⁄6
PSM_PERIOD_320H: Specify the unit for the PSM period to be 2 seconds, 30 seconds, 1 minute, 10 minutes, 1 hour, 10 hours, or 320 hours, respectively.
PSM_PERIOD_DISABLED: Specifying the unit for PSM period of
PSM_PERIOD_DISABLED means turning PSM off.
PSM_ACTIVE_6M: Specify the unit for the PSM active duration to be 2 seconds, 1 minute, or 6 minutes, respectively.
PSM_ACTIVE_DISABLED: Specifying the active duration unit of
PSM_ACTIVE_DISABLED means turning PSM off.