The drawings for the G01 are available as a PDF File.
The pinout of the G01 is available as a PDF File
The drawings for the G01 is available as a PDF File.
Please note that the PIN assignments for UART1 (TX1/RX1), SPI (CLK, MOSI, MISO) and I2C (SDA, SCL) are defaults and can be changed via software.
The AT commands for the Sequans Monarch modem on the G01 are available in a PDF file.
AT Commands for Sequans
Tutorials on the G01 module can be found in the examples section of this documentation. The following tutorials might be of interest for those using the G01: