home Introduction

done Pycom Products
done Getting Started
done Pymakr Plugin
done Pymakr Online
done Pytrack, Pysense, Pyscan
done Tutorials & Examples
done Firmware & API Reference
done Product Info, Datasheets
- done Development Modules
- done OEM Modules
  - done W01
  - done L01
  - done L04
  - done G01
  - done L01 OEM Baseboard Reference
  - done Universal OEM Baseboard Reference
- done Expansion Boards and Shields
- done Notes
done Pybytes
done Pymesh
done Documentation Notes
done Advanced topics
done documents

Ask on the forum

Product Info, Datasheets > OEM Modules > L04

L04

Datasheet

The datasheet of the L04 is available as a PDF File.

Pinout

The pinout of the L04 is available as a PDF File

Drawings

The drawings for the L04 are available as a PDF File.

Please note that the PIN assignments for UART1 (TX1/RX1), SPI (CLK, MOSI, MISO) and I2C (SDA, SCL) are defaults and can be changed via software.

Power Consumption

Here are some basic power usage measurements for various scenarios.

Idle : 36.2mA - Whilst the LO4 is idle. but awake
Lora transmit : 141mA - Whilst the LO4 is transmitting a Lora Payload
WiFi AP: 116mA - Whilst the LO4 is serving as a Wifi Access Point
Wifi client : 110mA - Whilst the LO4 is serving as a Wifi Access Client
Bluetooth : 116mA - Whilst the LO4 has bluetooth active
DeepSleep : 5.5 uA - Whilst the LO4 is in deepsleep

Tutorials

Tutorials on the L04 module can be found in the examples section of this documentation. The following tutorials might be of interest for those using the L04:

Previous

Next